The Tacx NEO 2T is a direct-drive smart trainer. This version comes with a factory-fitted Zwift Cog and freehub body, plus a handlebar-mounted Zwift Click for virtual shifting. With Zwift or ROUVY, the Cog works with nearly all 8–13-speed drivetrains. Check your bike’s compatibility before setup.
Road feel and quiet operation
Variable virtual inertia adjusts resistance to speed and gradient. In supported apps, Road Feel simulates surfaces such as cobblestones and gravel. Connect the trainer to external power to enable downhill simulation.
Power and measurements
Maximum resistance is 2,200 W and the trainer can simulate climbs of up to 25%. It measures power, speed and cadence. Power accuracy is ±1%, with no calibration required.
Connectivity
Bluetooth and ANT+ FE-C connect the trainer to compatible apps and devices. Pedal-stroke analysis depends on the app or compatible device; Tacx Desktop analysis is available on Windows.
General
Physical size
22.6" x 29.5" (575 x 750 mm)
Svars
47.4 lbs (21.5 kg)
Other information
Height
21.7" (55 cm)
Accuracy (+/-)
<1%
Wireless communication
ANT+ connectivity, BLUETOOTH wireless technology
Control by
Smartphone, tablet, ANT+ bike computers, stand alone, computer connection via ANT+ antenna
Read out on
Smartphone, tablet, bike computer, computer with ANT+ antenna
Connector indicator
2 LEDs
Power indicator
Multicolor LED, spot on floor
Magnets
32 neodymium magnets
Electrical requirement
110-240 Volts
Suitable cassettes
Shimano/SRAM 9 to 11 speed compatible Campagnolo (compatible, requires special cassette body) SRAM 12 speed/XDR (compatible, requires special cassette body) Shimano 12-speed
Suitable axles
Direct Drive quick release axle (130 mm/135 mm X 5 mm) for bikes with quick release axle Thru axle end caps (142 mm/148 mm X 12 mm) for bikes with thru-axle For bike dimensions
Gear ratio
Chainring set-up: up to 3 sprockets, teeth per sprocket, adjustable between 22 and 53
Max power
2200 Watt
Max incline
25%
Simulation of descent
Yes
Max torque
88 Nm
Max brake force
260 N
Flywheel
Virtual
Mass inertia
Variable to 275.6 lbs (125 kg)
Calibration
No calibration needed
Output
Speed, cadence, power
Measured Speed
Yes
Measured Cadence
Yes
Measured Power
Yes
Works without mains connection
Yes
Accessories available in our store that are compatible with this product.
Reviews
There are no reviews yet.